FANGZHAN immersion suit
Immersion suit is a special type of waterproof and dry clothing that prevents the wearer from hypothermia from immersion in cold water, after abandoning a sunken or capsized boat, especially in the open ocean
Product model: FZBW-II
Size: M,L,XL
Insulation performance: Soak in calm water between 0°C and 2°C for 6 hours, and the body temperature should not be lower than normal body temperature by 2°C
Product Certification: CCS/EC/RS
Related products
FANGZHAN electronic pressure gauge (LED display)
In addition to the traditional pointer to display the pressure of the gas cylinder, the electronic pressure gauge of the respirator also dynamically displays the pressure of the gas cylinder through sound, light and display, so that the gas volume of the cylinder can be known without looking at the pointer. When the gas volume in the cylinder is greater than 10MPa/100Bar, the green light on the front of the pressure gauge is on; when the pressure value is between 6MPa/60Bar and 10MPa/100Bar, the yellow light on the front of the pressure gauge is on; when the pressure gauge value is lower than 6Mpa/60Bar, The red light and surrounding lights began to flicker, and the alarm lights could be seen from every direction. At the same time, a high-decibel alarm sounded to remind users that the remaining gas in the gas cylinder was insufficient.FeaturesCompact structure and small size, intelligent electronic pressure gauge.
The battery has a long working time and is easy to replace.
Easy to install and easy to operate. Just take off the original pointer pressure gauge on the air compressor and replace it.
All adopt anti-collision, explosion-proof and waterproof design.
The display mode of the pointer pressure gauge is retained.
The display screen shows the real-time remaining pressure synchronously
FANGZHAN firefighter emergency rescue helmet
1. Comply with XF633-2006 standard, 17-style fire emergency rescue helmet style requirements,2. Performance: the shell has superior impact resistance, high temperature resistance, flame retardancy, electrical insulation and other properties.3. Helmet weight: about 0.79kg (excluding accessories);4. Structure:
The lining adopts a multi-point adjustment method, and the chin strap can be adjusted forward and backward to meet the needs of different face shapes and neck heights. The adjustment buckle is on the side to avoid contact with the chin. Freely adjust and lock within the range of 64cm, the wearing height of the front end of the hat hoop can be adjusted up and down, suitable for rescuers with different head shapes;
There is a headlight installation track on the helmet, which can be adjusted back and forth, the light can be adjusted up and down, and the communication function can be configured;
The helmet is equipped with goggles, which have the properties of anti-high-speed particle impact, anti-fog, high temperature resistance, etc.;
The helmet has a built-in foam buffer layer, which has the functions of heat insulation, high temperature resistance and absorption;5. Model: RJK-QK17-FZ
FANGZHAN Firefighter emergency rescue suit (winter style)
1. The product meets the standard requirements of XF 633 "Protective Clothing for Firefighters' Emergency Rescue".2. The clothing structure is composed of a three-layer structure of a protective layer, a waterproof breathable layer and a comfortable layer.3. Resin zippers on the jacket front and trousers front4. Belt: buckle-type belt, the hardware has been treated with anti-corrosion, which is comfortable to wear.5. Clothing weight: the total mass is about 1.7kg (excluding belt and marching cap).6. Model: RJF-F1-FZ
FANGZHAN Firefighter Water Rescue Protective Boots
1. Structural style: firefighter water rescue protective boots are composed of outer sole, outer boots, built-in sock, boot inner sole with anti-puncture layer and other parts; the height from the center of the inner heel to the lowest point of the boot mouth is 210mm ;The puncture-proof layer of the insole of the boot covers the entire insole of the boot; the heel has an anti-off structure for wearing with flippers; it is fastened in the form of a zipper and has a design to prevent accidental loosening; the main color is black.2. The upper is resistant to bending, cutting, puncture, and the outsole is resistant to bending and non-slip3. Mass: about 1.1kg4. Model: ZFSJ-X-FZ
FANGZHAN SCBA Electronic pressure gauge digital manometer
In addition to the traditional pointer to display the pressure of the gas cylinder, the electronic pressure gauge also dynamically displays the pressure of the gas cylinder through sound and light, so that the gas volume of the gas cylinder can be known without looking at the pointer. When the gas volume in the cylinder is greater than 10MPa/100Bar, the green light on the front of the pressure gauge is on; when the pressure value is between 6MPa/60Bar and 10MPa/100Bar, the yellow light on the front of the pressure gauge is on; when the pressure gauge value is lower than 6Mpa/60Bar, The red light and surrounding lights began to flicker, and the alarm lights could be seen from every direction. At the same time, a high-decibel alarm sound began to sound, reminding the users that the remaining gas in the gas cylinder was insufficient.
FeaturesCompact structure and small size, intelligent electronic pressure gauge.
The battery has a long working time and is easy to replace.
Easy to install and easy to operate. Just take off the original pointer pressure gauge on the air compressor and replace it.
All adopt anti-collision, explosion-proof and waterproof design.
The display mode of the pointer pressure gauge is retained.
Sign in
No account yet?
Create an Account