Water Rescue
FANGZHAN Dry water rescue protective clothing
1. Structural style
The knees, elbows and hips of the fireman's dry water rescue protective clothing are reinforced with wear-resistant materials; the fireman's dry water rescue protective clothing has pockets for necessary rescue items and has a drainage function; it is a one-piece type, Contains one-piece foot covers; the zipper is in front of the body, meeting the requirements for one person to put on and take off, and there is a zipper at the crotch; the main body color is red, and the reinforced part is black.2. Fabric: surface moisture resistance: water level: 4; wear resistance; hydrostatic pressure resistance3. Overall anti-leakage performance: After the anti-leakage test, the quality of the water in the firefighter's dry water rescue protective clothing is 200g.4. Thermal insulation performance: basal body temperature drop difference: 0.6°C;5. Applicable performance:
5.1. Restrictions on wearing lifejackets: firefighter dry water rescue protective clothing does not restrict users to wear lifejackets. ;
5.2. Mobility of the wearer: A person wearing a fireman's dry water rescue protective suit can walk, crawl, swim and climb onto the platform.6. Mass: about 1900g7. Carrying weight (including dry water rescue protective clothing for firefighters, thermal underwear and carrying bag): about 2500g
FANGZHAN Fire-fighting special life jacket
1. The fire-fighting life jacket is composed of a vest-type life jacket body, rescue airbag and rescue equipment; the vest-type life jacket body is composed of wrapping cloth, inherent buoyancy material, zipper, ribbon and buckle; the rescue airbag is composed of an air chamber and a manual inflation device , Blowing (releasing) air pipe and cylinder.2. Rescue equipment is equipped with a position indicating light and a whistle fastened by a string, and an inflatable life buoy.3. Zipper: The slider is self-locking.4. When the life-saving air bag is not inflated, the wearer wears a life jacket and enters the water in any way. The life jacket can keep the human body in an upright posture, and the mouth of the person is more than 120mm above the water surface.
When the rescue airbag is inflated, the lifejacket can put the human body in a backward posture within 3 seconds, and the angle between the human body trunk and the plumb line is not less than 30°, and the human mouth is more than 120mm above the water surface.5. Model: ZFJS-Ⅰ-50/100-FZ
FANGZHAN Firefighter Water Rescue Protective Boots
1. Structural style: firefighter water rescue protective boots are composed of outer sole, outer boots, built-in sock, boot inner sole with anti-puncture layer and other parts; the height from the center of the inner heel to the lowest point of the boot mouth is 210mm ;The puncture-proof layer of the insole of the boot covers the entire insole of the boot; the heel has an anti-off structure for wearing with flippers; it is fastened in the form of a zipper and has a design to prevent accidental loosening; the main color is black.2. The upper is resistant to bending, cutting, puncture, and the outsole is resistant to bending and non-slip3. Mass: about 1.1kg4. Model: ZFSJ-X-FZ
FANGZHAN Firefighter Water Rescue Protective Gloves
1. Structural style: The fireman's water rescue protective gloves are of five-finger separation type; the palm and fingers are covered with materials to enhance the wear resistance of the outer layer; the length of the glove sleeve exceeds the wrist bone by 70mm; the fireman's water rescue protective gloves and the cuff of the water rescue suit Cooperate with the wearing, the glove opening has a tightening design, which can limit debris from entering the glove.2: Wear-resistant, cut-resistant, tear-resistant, puncture-resistant3. Model: ZFSJ-T-FZ
FANGZHAN Firefighter water rescue protective helmet
1. Structural style: firefighter water rescue protective helmet is composed of cap shell, buffer layer, comfort layer, chin strap, etc., and has an interface for installing accessories; the cap shell of the helmet has an opening drainage design; head circumference and chin strap The size is adjustable; the helmet has ear hearing protection design; the color is red.2. Impact resistance, penetration resistance, tensile strength3. Mass (excluding accessories): about 540g4. Model: ZFSJ-K-FZ
FANGZHAN Life thrower throwing device
1. Structure
1.1 The thrower is equipped with a pressure gauge, and the range of the pressure gauge can meet the work requirements, and the accuracy is not less than 1.6;
1.2. The thrower is equipped with a launch safety device2. Projection performance:
2.1 Distance: throwing rope: 245±5M, water throwing rope: 165±5M;
2.2 Projection deviation angle: throwing rope: 1.5±0.5°, water throwing rope: 1.5±0.5°;3. Throwing objects:
3.1 Length: The length of the throwing rope and water throwing rope is not less than 1.15 times the rated throwing distance.4. Corrosion resistance of metal parts5. Safety valve: The opening pressure of the safety valve should be 1.1 times the rated working pressure, and the error should not exceed ±0.5MPa.6. Pressure resistance7. The design, manufacture, inspection and use of throwing gas cylinders comply with national standards8. Model: PTQ7.0-Y230S160
FANGZHAN Water rescue floating lifeline
1. Structure: The water rescue floating life-saving rope is a core-spun rope structure, and the main load-bearing part is made of continuous fibers. There is no mechanical damage on the surface of the water rescue floating life-saving rope, and the whole rope has uniform thickness and consistent structure. The rope sheath is woven into 2 strands of light-storing luminescent fibers that run through the whole rope.2: Diameter: 9.5±0.2mm3. Floating performance: After 48 hours of floating performance test, the water rescue floating lifeline can always float on the water.4. Model: ZFJS-S-9.5-FZ
FANGZHAN Water rescue knife
1. Appearance and structure: The body of the water rescue knife (hereinafter referred to as the rescue knife) is made of metal materials, and adopts the structure of a straight knife body, an arc-shaped blade and a serrated knife back. The metal surface is smooth and smooth, free from defects such as cracks, burrs, dents or defects. The rescue knife has a sheath, and the handle has a non-slip design.2. Length: overall length: 190±1mm; handle length: 100±1mm;3. Quality: rescue knife: 33g; rescue knife with scabbard: 70g4. The knife body is resistant to bending, the sheath is resistant to pressure, the sheath is resistant to high temperature, excellent cutting performance, corrosion resistance, low temperature resistance and drop resistance5. Model: ZFJS-D-190-FZ
FANGZHAN Wet water rescue protective clothing
1. Structural style
The shoulders, elbows, hips and knees of the firefighter's wet water rescue protective clothing are reinforced with wear-resistant materials; the firefighter's wet water rescue protective clothing has pockets for holding necessary rescue items and has a drainage function; it is a split type, The cuffs and trouser cuffs have tightening design; the main body color is red, and the reinforced parts are black.2. Fabric:
Color fastness: water friction resistance: grade 4; washing stain resistance: grade 4: color fastness to light: meets the requirements of grade 4; wear resistance; hydrostatic pressure resistance3. Temperature adaptability: Firefighters' wet water rescue protective clothing has no shrinkage, rupture, swelling, decomposition, etc. or changes in mechanical properties after high and low temperature tests.4. Applicable performance:
Restrictions on wearing lifejackets: The fireman's wet water rescue protective suit does not restrict the user to wear a lifejacket.
Wearer Mobility: A person wearing a firefighter wet water rescue suit can walk, crawl, swim and climb platforms.5. Mass: about 1.9kg6. Model: ZFSJ-FS-FZ
FANGZHAN white water life jacket
1. Color ： orange;2. The bust applicable to the torrent lifejacket is (800-1200) mm;3. The torrent lifejacket has a crotch belt, and the width of the crotch belt is 25mm; the fastening and fixing of the torrent lifejacket adopts fasteners and zippers4. There are reflective tapes on the chest, abdomen, shoulders and back of the rapids life jacket, and the 360° ring is visible2. Structure and accessories
2.1. Structure: The torrent lifejacket is composed of a vest-type lifejacket body and rescue accessories; the vest-type lifejacket body is composed of wrapping cloth, inherent buoyancy material, zipper, webbing and buckle parts.
2.2. Rescue equipment: equipped with a position indicating light and a whistle fastened by a string, and a quick release belt.3. Water immersion performance:
3.1. Posture in water: The subject wears a torrent lifejacket and relaxes in the water. The body can be in an upright posture, and the mouth is more than 120mm above the water surface.
3.2. Diving: the torrent lifejacket can make the wearer emerge from the water without any damage affecting posture and buoyancy in the water, and the mouth is more than 120mm above the water surface; the torrent lifejacket has no obvious displacement and does not cause harm to the wearer; no rescue Damage to attachments and accessories.4. Model: ZFJS-Ⅱ-190-FZ