CHEMSAFE PLUS WINTER VV837 GLOVE IN PVC/NITRILE ON ACRYLIC LINING – PVC/NITRILE COATING HAND – 30 CM

Norms

REGULATION (EU) 2016/425
-EN420:2003+A1:2009 : General requirements
-EN388:2016 : Protective gloves against mechanical Risks (Levels obtained on the palm)
-Resistance to abrasion (from 1 to 4) : 3
-Resistance to cutting (from 1 to 5) : 1
-Resistance to tear (from 1 to 4) : 2
-Resistance to puncture (1 to 4) : 1
-Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) : A
-EN ISO 374-1:2016 : Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
-Type A - Water and air tightness according to EN ISO 374-2:2019. Permeation resistance to at least 6 chemicals at level 2 according to EN16523-1: 2015, : A
-Determination of resistance to degradation by chemicals according to EN ISO 374-4: 2019. Part 4: Determination of resistance to degradation by chemicals. : .
-Caustic soda 40% (K) CAS 1310-73-2 : 6 > 480 mn
-Sulphuric acid 96 % (L ) CAS 7664-93-9 : 4 > 120 mn
-Nitric acid 65% (M) CAS 7697-37-2 : 2 > 40 mn
-Acetic acid 99% (N) CAS 64-19-7 : 2 > 45 min
-Hydrogen peroxide 30% (P) 7722-84-1 : 6 > 480 mn
-Formaldehyde 37% (T) CAS 50-00-0 : 6 > 480 min
-EN ISO 374-5: 2016 : Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks: VIRUS.
-BACTERIA + FUNGI : Water and air tightness according to EN ISO 374-2:2019. : .
-EN511:2006 : Protective gloves against cold (X = Unrealized test)
-Resistance to convective cold (from 1 to 4) : 1
-Resistance to contact cold (from 1 to 4) : 1
-Waterproof (0 or 1) : 1