Dräger PointGard 2100
Benefits
Toxic Gases and Oxygen Detector
Sensor: Electrochemical Sensor Installation: Non-explosion proof Interface: 4-20 mA, Relays IP class: IP 54 Special: Self-contained gas monitor
Ready to use out of the box
PointGard is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The pre-calibrated sensor is ready to use.
Detect over 100 toxic gases using DrägerSensors
Electrochemical DrägerSensors provide continuous detection even under the harshest conditions. Most DrägerSensors offer a very wide temperature range from -40 °C to +65 °C (-40 °F to +149 °F). The built-in memory contains all the information relating to calibration and configuration. The sensor is pre-calibrated and ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance.
Flexible communications
PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal output allows integration into a larger gas detection system.
Rugged and compact housing
PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it easily to fit most applications. Built-in cable glands make it easy to install.
Advanced display with diagnostics
The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to use. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.
Monitor remote areas up to 30 meters away
A remote sensor enclosure with a cable up to 30 metres long, designed for use in ordinary locations, is available for electrochemical sensors.
KEY FACTS
Type
Stand-alone
Cable entry
M20
Display
✓
Intrinsic Safety
✗
Flameproof
✗
Increased Safety
✗
SIL
✗
4-20 mA
✓
Bus
✗
HART®
✓
Wireless
✗
Technical Data
Power Supply
100 - 240 V AC 50 - 60 Hz or 10 - 30 V DC
Temperature (operation)
-20°C - 50°C
Humidity
0 to 95% r.h., non-condensing
Pressure (hPa)
700 - 1300
Dimensions (H × W × D)
0.26x0.28x0.12 m
Weight
8.6 lb
Housing Material
Glass fibre reinforced polyester (GFRP)
Degree of protection (IP class)
IP66
Features
ATEX
✗
IECEx
✗
UL
✗
CSA
✗
CE marking
✓
GOST (EAC)
✗
Glass fibre reinforced polyester (GFRP)
✗
Shipping approval (MED)
✗
Downloads
Product Information: Dräger PointGard 2100 (PDF)
The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air. PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.
IFU PointGard 2000 Series 9033866 en, en-us me
These instructions for use are provided for informational purposes only. Please always read and comply with the instructions for use delivered with the product.
