FANGZHAN 50kg dry powder fire extinguisher (pressure storage type) FZPM-50
Capacity (kg): 50
Cylinder diameter (mm): φ300
Fire rating: A IIIB
Fire extinguisher weight (kg): 90.88
Packing size (mm): 515*430*1100
Working pressure: 15bar
Test pressure: 30bar
Working temperature: -30℃-+60℃
Related products
FANGZHAN Fire-fighting special life jacket
1. The fire-fighting life jacket is composed of a vest-type life jacket body, rescue airbag and rescue equipment; the vest-type life jacket body is composed of wrapping cloth, inherent buoyancy material, zipper, ribbon and buckle; the rescue airbag is composed of an air chamber and a manual inflation device , Blowing (releasing) air pipe and cylinder.2. Rescue equipment is equipped with a position indicating light and a whistle fastened by a string, and an inflatable life buoy.3. Zipper: The slider is self-locking.4. When the life-saving air bag is not inflated, the wearer wears a life jacket and enters the water in any way. The life jacket can keep the human body in an upright posture, and the mouth of the person is more than 120mm above the water surface.
When the rescue airbag is inflated, the lifejacket can put the human body in a backward posture within 3 seconds, and the angle between the human body trunk and the plumb line is not less than 30°, and the human mouth is more than 120mm above the water surface.5. Model: ZFJS-Ⅰ-50/100-FZ
FANGZHAN Firefighter emergency rescue suit (winter style)
1. The product meets the standard requirements of XF 633 "Protective Clothing for Firefighters' Emergency Rescue".2. The clothing structure is composed of a three-layer structure of a protective layer, a waterproof breathable layer and a comfortable layer.3. Resin zippers on the jacket front and trousers front4. Belt: buckle-type belt, the hardware has been treated with anti-corrosion, which is comfortable to wear.5. Clothing weight: the total mass is about 1.7kg (excluding belt and marching cap).6. Model: RJF-F1-FZ
FANGZHAN Inflatable Lifejacket 150N Life Vest
Type：FZSZ-IIIBuoyancy: 150NWeight: 1kg；Aeration molding time：≤5sFloating time：≥24hTemperature：-30℃～+65℃Description: Highly visible design, 2 large area SOLAS approved USA 3M reflectors on cover, makes you more visible in dark!
Features:
Cover Material: Waterproof Polyester Oxford Neoprene
Air bag material: Nylon + TPU
Inflation time: Less than 5s
Floating duration: Greater than 48hrs
Buoyancy loss after 24 hours: Less then or equal to 5%
CO2 Weight: 33g x2pcs
Buoyancy :330LBS(150N)
FANGZHAN SCBA Electronic pressure gauge digital manometer
In addition to the traditional pointer to display the pressure of the gas cylinder, the electronic pressure gauge also dynamically displays the pressure of the gas cylinder through sound and light, so that the gas volume of the gas cylinder can be known without looking at the pointer. When the gas volume in the cylinder is greater than 10MPa/100Bar, the green light on the front of the pressure gauge is on; when the pressure value is between 6MPa/60Bar and 10MPa/100Bar, the yellow light on the front of the pressure gauge is on; when the pressure gauge value is lower than 6Mpa/60Bar, The red light and surrounding lights began to flicker, and the alarm lights could be seen from every direction. At the same time, a high-decibel alarm sound began to sound, reminding the users that the remaining gas in the gas cylinder was insufficient.
FeaturesCompact structure and small size, intelligent electronic pressure gauge.
The battery has a long working time and is easy to replace.
Easy to install and easy to operate. Just take off the original pointer pressure gauge on the air compressor and replace it.
All adopt anti-collision, explosion-proof and waterproof design.
The display mode of the pointer pressure gauge is retained.
Sign in
No account yet?
Create an Account