FANGZHAN Firefighter Water Rescue Protective Boots
1. Structural style: firefighter water rescue protective boots are composed of outer sole, outer boots, built-in sock, boot inner sole with anti-puncture layer and other parts; the height from the center of the inner heel to the lowest point of the boot mouth is 210mm ;The puncture-proof layer of the insole of the boot covers the entire insole of the boot; the heel has an anti-off structure for wearing with flippers; it is fastened in the form of a zipper and has a design to prevent accidental loosening; the main color is black.
2. The upper is resistant to bending, cutting, puncture, and the outsole is resistant to bending and non-slip
3. Mass: about 1.1kg
4. Model: ZFSJ-X-FZ
Related products
FANGZHAN FZYD-V lifejacket light
Lifejacket light is a kind of lifesaving outfit equipped on the lifejacket. It is prepared for persons who fall into the sea at night to give out light signal to the lifesaver so as to be saved.Main Technical SpecificationsLuminous Intensity ≥0.75cdTime of Power ≥8hAdaptive Environment temperature : -30℃~+65℃Adaptive water temperature: -1℃~+30℃Lighting Form Flashing Flash Frequency: 50-70time/minColor of Light : WhiteValidity of Battery: 5 yearsApproval: EC
FANGZHAN Child lifejacket life vest
◆ Model :FZEY-I◆ Buoyancy: 150N±5◆ Weight: ＜1kg◆ Conform to SOLAS1974 and its latest amendments◆ Fabric material: polyester◆ Buoyancy material: EPE◆ Accessories: equipped with whistle, partner rope, pull loop◆ There is a buoyancy block on the back, a collar with head support to keep the head above the water surface, and the sum of the high-strength buckles is not less than 400cm2◆ Applicable people: Weight: 15kg-43kg Height: 100cm-155cm◆ Certificate: CCS / EC / RS
FANGZHAN firefighter emergency rescue helmet
1. Comply with XF633-2006 standard, 17-style fire emergency rescue helmet style requirements,2. Performance: the shell has superior impact resistance, high temperature resistance, flame retardancy, electrical insulation and other properties.3. Helmet weight: about 0.79kg (excluding accessories);4. Structure:
The lining adopts a multi-point adjustment method, and the chin strap can be adjusted forward and backward to meet the needs of different face shapes and neck heights. The adjustment buckle is on the side to avoid contact with the chin. Freely adjust and lock within the range of 64cm, the wearing height of the front end of the hat hoop can be adjusted up and down, suitable for rescuers with different head shapes;
There is a headlight installation track on the helmet, which can be adjusted back and forth, the light can be adjusted up and down, and the communication function can be configured;
The helmet is equipped with goggles, which have the properties of anti-high-speed particle impact, anti-fog, high temperature resistance, etc.;
The helmet has a built-in foam buffer layer, which has the functions of heat insulation, high temperature resistance and absorption;5. Model: RJK-QK17-FZ
FANGZHAN Firefighter Water Rescue Protective Gloves
1. Structural style: The fireman's water rescue protective gloves are of five-finger separation type; the palm and fingers are covered with materials to enhance the wear resistance of the outer layer; the length of the glove sleeve exceeds the wrist bone by 70mm; the fireman's water rescue protective gloves and the cuff of the water rescue suit Cooperate with the wearing, the glove opening has a tightening design, which can limit debris from entering the glove.2: Wear-resistant, cut-resistant, tear-resistant, puncture-resistant3. Model: ZFSJ-T-FZ
FANGZHAN Life thrower throwing device
1. Structure
1.1 The thrower is equipped with a pressure gauge, and the range of the pressure gauge can meet the work requirements, and the accuracy is not less than 1.6;
1.2. The thrower is equipped with a launch safety device2. Projection performance:
2.1 Distance: throwing rope: 245±5M, water throwing rope: 165±5M;
2.2 Projection deviation angle: throwing rope: 1.5±0.5°, water throwing rope: 1.5±0.5°;3. Throwing objects:
3.1 Length: The length of the throwing rope and water throwing rope is not less than 1.15 times the rated throwing distance.4. Corrosion resistance of metal parts5. Safety valve: The opening pressure of the safety valve should be 1.1 times the rated working pressure, and the error should not exceed ±0.5MPa.6. Pressure resistance7. The design, manufacture, inspection and use of throwing gas cylinders comply with national standards8. Model: PTQ7.0-Y230S160
Sign in
No account yet?
Create an Account