COMPOSITION
Back: full grain waterproof treated cowhide. Thickness between 1.0 and 1.2 mm.
Palm: Full grain reversed waterproof cowhide. Thickness between 1 and 1.2 mm.
Lining 100% Kevlar®, 10 gauge, 2 thread.
Norms
USA STANDARDS
-ASTM-F-2675M:2013 : Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection.
-Arc Thermal Performance Value (cal/cm²) . : 53 (CAL/CM²)
-Additional special requirements : 53 cal/cm²
REGULATION (EU) 2016/425
-EN420:2003+A1:2009 : General requirements
-Dexterity (from 1 to 5) : 5
-Waterproofing : Ability of the glove to withstand the penetration of water, moisture. : 4/4 ≥ 180 mn
-EN388:2016 : Protective gloves against mechanical Risks (Levels obtained on the palm)
-Resistance to abrasion (from 1 to 4) : 3
-Resistance to cutting (from 1 to 5) : 2
-Resistance to tear (from 1 to 4) : 4
-Resistance to puncture (1 to 4) : 3
-Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) : B
Product Used Risks
Construction / Civil engineering.
Agriculture / Green areas.
Services / Logistics.
Wearing.
PERFORATION.
CUTTING.
HIGHLIGHTS
Tested according to ASTM F2675 - Test method that determines the incident energy required to cause a second-degree burn.
ATPV : 53 cal/cm² on the palm.
Kevlar® lining.
Increased resistance to cut, tear and puncture.
Water repellent treatment applied on the reverse hide full grain.
Ten times more effective than the grain.
