COMPOSITION
HEATnocut® fibre (high performance synthetic fibres).
INNOVATIONS
Cut level C.
Norms
Regulation (EU) 1935/2004 Contact with food products
-GLOB MIGR : Food contact - Overall Migration
-Contact with wet or watery food : .
-Contact with fatty foods : .
-Contact with acidic foods : .
USA STANDARDS
-ANSI-ISEA 105:2016 : Hand protection
-Resistance to cutting by sharp objects (from A1 to A9) : A2
Certif. S mark Resolution 896/99
-EN388:2003 : Protective gloves against mechanical Risks (Levels obtained on the palm)
-Resistance to abrasion (from 1 to 4) : 4
-Resistance to cutting (from 1 to 5) : 5
-Resistance to tear (from 1 to 4) : 4
-Resistance to puncture (1 to 4) : X
-EN407:2004 : Protective gloves against Heat & Fire risks (X = Unrealized test)
-Resistance to flammability (from 1 to 4) : X
-Contact heat resistance (from 1 to 4) : 1
-Convective heat resistance (1 to 4) : X
-Radiant heat resistance (from 1 to 4) : X
-Small splashes of molten metal (from 1 to 4) : X
-Large quantities of molten metal (from 1 to 4) : X
REGULATION (EU) 2016/425
-EN420:2003+A1:2009 : General requirements
-Dexterity (from 1 to 5) : 5
-EN388:2016 : Protective gloves against mechanical Risks (Levels obtained on the palm)
-Resistance to abrasion (from 1 to 4) : 3
-Resistance to cutting (from 1 to 5) : X
-Resistance to tear (from 1 to 4) : 4
-Resistance to puncture (1 to 4) : X
-Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) : C
-EN407:2004 : Protective gloves against Heat & Fire risks (X = Unrealized test)
-Resistance to flammability (from 1 to 4) : X
-Contact heat resistance (from 1 to 4) : 1
-Convective heat resistance (1 to 4) : X
-Radiant heat resistance (from 1 to 4) : X
-Small splashes of molten metal (from 1 to 4) : X
-Large quantities of molten metal (from 1 to 4) : X
Product Used Risks
Heavy industry.
Construction / Civil engineering.
Oil / Gas.
Second work / craftman.
Light industry.
Hygiene environment.
Wind energy.
Mining.
Wearing.
CUTTING.
Heat.
HIGHLIGHTS
HEATnocut® High Performance Polyethylene.
Contact heat (100°C for 15 seconds), and cut resistant
Very good level of abrasion resistance.
Food compatibility.
