COMPOSITION
Support: HEATnocut® fibre (high performance synthetic fibres).
Coating : 100% latex.
INNOVATIONS
Cut level D.
Norms
USA STANDARDS
-ANSI-ISEA 105:2016 : Hand protection
-Resistance to cutting by sharp objects (from A1 to A9) : A3
Certif. S mark Resolution 896/99
-EN388:2003 : Protective gloves against mechanical Risks (Levels obtained on the palm)
-Resistance to abrasion (from 1 to 4) : 4
-Resistance to cutting (from 1 to 5) : 5
-Resistance to tear (from 1 to 4) : 4
-Resistance to puncture (1 to 4) : 2
-EN407:2004 : Protective gloves against Heat & Fire risks (X = Unrealized test)
-Resistance to flammability (from 1 to 4) : X
-Contact heat resistance (from 1 to 4) : 2
-Convective heat resistance (1 to 4) : X
-Radiant heat resistance (from 1 to 4) : X
-Small splashes of molten metal (from 1 to 4) : X
-Large quantities of molten metal (from 1 to 4) : X
REGULATION (EU) 2016/425
-EN420:2003+A1:2009 : General requirements
-Dexterity (from 1 to 5) : 3
-EN388:2016 : Protective gloves against mechanical Risks (Levels obtained on the palm)
-Resistance to abrasion (from 1 to 4) : 3
-Resistance to cutting (from 1 to 5) : X
-Resistance to tear (from 1 to 4) : 4
-Resistance to puncture (1 to 4) : 2
-Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) : D
-EN407:2004 : Protective gloves against Heat & Fire risks (X = Unrealized test)
-Contact heat resistance (from 1 to 4) : 2
-Convective heat resistance (1 to 4) : X
-Radiant heat resistance (from 1 to 4) : X
-Small splashes of molten metal (from 1 to 4) : X
-Large quantities of molten metal (from 1 to 4) : X
Product Used Risks
Heavy industry.
Construction / Civil engineering.
Light industry.
Services / Logistics.
Wind energy.
Wearing.
CUTTING.
Heat.
HIGHLIGHTS
Latex coating.
Good resistance to abrasion
Rough finish for excellent grip on handled objects.
HEATnocut® High Performance Polyethylene.
Contact heat (250°C for 15 seconds) and cut resistance
Very good level of abrasion resistance.
