LIFEJACKET LIGHT LNK-LJ-03A1, MED, USCG APPROVED STROBE LIGHT
LNK-LJ-03A1 lifejacket light is lithium battery-powered emergency lights to be installed on all kinds of life jackets. When the lifejacket light contacts water they will be automatically activated and keep outputting the flashing white light more than 0.75cd light intensity during at least 28hours(24 hours at -1℃) which can uninterruptedly indicate the survivor`s location to increase the success rate of rescue. They can be manually turned off and turned on while the water sensors contact with water. The lights can self-float on the water at any time because of the structure design.
LNK-LJ-03A1 : Only with signal flashing light can be manually turned off and on while the water sensors contact with water.
LNK-LB-01B LIFEBUOY LIGHT
The LNK-LB-01B Lifebuoy Light is a lithium battery-powered emergency light designed for man overboard situations, meant to be installed with lifebuoys. Equipped with both gravity and water sensors, this lifebuoy light activates through a dual system. Upon immersion in water, the LED lamp automatically orients upwards due to its gravity design, activating and emitting a flashing white light with an intensity exceeding 2.0cd for at least 24 hours (14 hours at -1℃). This continuous illumination significantly enhances the visibility of the lifebuoy, increasing the likelihood of a successful rescue. Additionally, the light is designed to float on the water and features an automatic turn-off mechanism when not in water or when the LED lamp is oriented downwards. The LNK-LB-01B embodies an advanced solution for maritime safety and emergency response.
LNK-LB-02B LIFEBUOY LIGHT
The LNK-LB-02B Lifebuoy Light is a replaceable alkaline battery-powered emergency light designed for man overboard situations. Positioned alongside the lifebuoy and attached to it, this light is designed to accompany the lifebuoy when thrown into the water. Upon immersion, the light automatically floats, and the LED lamp orients upwards, activating to emit a flashing white light with an intensity exceeding 2.0cd for at least 24 hours (10 hours at -1℃). This prolonged illumination serves to continuously indicate the lifebuoy’s position, significantly enhancing the chances of a successful rescue.
Incorporating a gravity sensor activation system, the light is designed to self-right in water, ensuring proper orientation, and it automatically turns off within 3 seconds when not in use. The LNK-LB-02B is a reliable and efficient solution for maritime safety and emergency response.
LNK-LB-03B INTRINSICALLY SAFE LIFEBUOY LIGHT ATEX
LNK-LB-03B lifebuoy light is Intrinsically Safe light to be installed with lifebuoy. The light is SOLAS/MED approved and also certified for ATEX & IEC Ex.
The Marking is“ II 1G Ex ia op is IIC T4 Ga”-35℃≤Ta≤+85℃ which represents:
“II”=Group II Non-mining equipment use for applications other than mines.
“1”=Category 1 (Zone 012)
“G”=Gas.
“Ex”=The equipment was fulfills current EN standard.
“ia”=Intrinsic safety with “very high” protection level.
“op is”=inherently safe optical radiation.
“IIC”= IIC goup explosive gas typical gas is hydrogen.
“T4”=The maximum surface temperature is 135℃.
“Ga”=equipment for explosive gas atmospheres having a “very high” Level of Protection which is not a source of ignition in normal operation during expected malfunctions or during rare malfunctions.
Ambient Temperature is -35℃ ～ +85℃.
It is a suitable lifesaving device for hazardous marine activity applications such as offshore drill platform, oil tanks etc.The light was designed with gravity sensor and water sensors double activation system. Once the lifebuoy light is thrown into water with lifebuoy, the head of LED lamp will automatically upwards owing to the gravity design, and the water sensors will contact water then activate the light immediately.If the head of LED lamp downwards or the light leaves from water, the light will automatically turn-off.
LNK-LBL1 LED LIFEBOAT LIGHT(EXTERNAL)
LNK-LBL1 LED external lifeboat light is a professional signal light for marine lifeboats and rescue boats. It meet the requirements of SOLAS USCG and CCS regulations and obtain relevant certification. The products adopt high-brightness LED light source it also have the advantages of modern appearance durable excellent performance and -52℃ polar low temperature resistance. The product is supplied by DC 12 / 24V power and controled by switch through the input cable. Once activated it will continuously output flashing white light signal with light intensity >4.3cd to indicate the position of lifeboat / rescue boat.
LNK-LBL2 LED LIFEBOAT LIGHT (INTERNAL)
LNK-LBL2 LED internal lifeboat light is a professional signal light for marine lifeboats and rescue boats. It meet the requirements of SOLAS USCG and CCS regulations and obtain relevant certification. The products adopt high-brightness LED light source it also have the advantages of modern appearance durable excellent performance and -52℃ polar low temperature resistance. The product is supplied by DC 12 / 24V power and controled by switch through the input cable. Once activated it will emit a constant light with average light intensity >0.5cd for reading the instructions of life saving appliances.
LNK-LJ-03A1W LITHIUM LIFEJACKET LIGHT
LNK-LJ-03A1W lifejacket lights are lithium battery-powered emergency lights to be installed on all kinds of life jackets. When the lifejacket lights contact water, they will be automatically activated and keep outputting the flashing white light more than 0.75cd light intensity during at least 28hours(24 hours at -1℃), which can uninterruptedly indicate the survivor’s location to increase the success rate of rescue. They can be manually turned off and turned on while the water sensors contact with water. The lights can self-float on the water at any time because of the structure design.
LNK-LR-01A LIFERAFT LIGHT
LNK-LR-01A Liferaft Light is a position indicating light designed for liferafts. It fully complies with the latest IMO MSC.81(70) standard and has obtained MED certification. This light is installed on the liferaft and is automatically activated when the liferaft is inflated and the “O”-ring is pulled out from the liferaft light unit.
The external light, positioned on the top of the liferaft, has a milky white cover and emits a flashing white light with a light intensity exceeding 4.3cd to clearly indicate the position of the liferaft. Meanwhile, the internal light, located inside the liferaft, provides a constant light with an intensity of over 0.5cd, serving as a basic lighting source for the occupants to read instructions and navigate inside the liferaft. It features a user-friendly manual switch on the main body of the light, allowing users to control its operation.
This compact liferaft light, with its minimal external lamp size, is especially suitable for compact 2~3 person yacht liferafts. It is designed to be compatible with liferafts from Arimar and Ari-light, offering a reliable and efficient solution for maritime safety.
LNK-LR-02C LIFERAFT LIGHT
The LNK-LR-02C Liferaft Light is a lithium battery-powered emergency light designed for installation with liferafts. Upon liferaft inflation, the “O” shape ring on the light is pulled out, activating both the exterior and interior lights automatically. The exterior light, positioned atop the liferaft, emits a flashing signal with a light intensity exceeding 4.3cd, effectively indicating the liferaft’s position for rescue. Meanwhile, the interior light provides steady illumination with a 0.5cd light intensity, suitable for basic tasks such as reading instructions. Manual switches on the light’s main body allow independent control of the external and internal lights. Notably, the light excels in low-temperature conditions, with the external light capable of working for at least 18 hours at -30℃ while maintaining a light intensity exceeding 4.3cd.
LNK-LR-03A LIFERAFT LIGHT
The LNK-LR-03A Liferaft Light is a lithium battery-powered emergency light designed for installation with liferafts. Upon liferaft inflation, the “O” shape ring on the light is pulled out, triggering the opening of the switch clip, which automatically activates both the exterior and interior lights. The exterior light, positioned on the top of the liferaft canopy, emits a flashing signal with a light intensity exceeding 4.3cd, continuously indicating the liferaft’s position. Simultaneously, the interior light, integrated into the light’s main body, provides a steady 0.5cd light for reading instructions and basic illumination. Independent manual switches on the light’s main body allow for separate control of the external and internal lights. Remarkably, the light excels in low-temperature conditions, with the exterior light capable of working for at least 15 hours at -30℃ while maintaining a light intensity exceeding 4.3cd.
LNK-LR-05A LIFERAFT LIGHT
The LNK-LR-05A Liferaft Light is a lithium battery-powered emergency light to be installed on liferafts. This light is installed on the liferaft and is automatically activated when the liferaft is inflated and the “O” shaped ring has been pulled out from the switch clip.
LNK-LSL-3A INTRINSICALLY SAFE LIFEJACKET LIGHT
LNK-LSL-3A lifejacket light is intrinsically safe light to be installed on all kinds of life jackets. The products are SOLAS MED approved and also certified by ATEX.
The Marking is“ II 2G Ex ia ⅡC T3 Gb”-35℃≤Ta≤65℃ which represents:
“II”=Group II Non-mining equipment use for applications other than mines.
“2”=Category 2 (Zone 1 2)
“G”=Gas.
“Ex”=The equipment was fulfills current EN standard.
“ia”=Intrinsic safety with “very high” protection level.
“IIC”= IIC goup explosive gas typical gas is hydrogen.
“T3”=The maximum surface temperature is 200℃.
“Gb”=Equipment for explosive gas atmospheres having a “high” Level of Protection which is not a source of ignition in normal operation or during expected malfunctions .
Ambient Temperature is -35℃≤Ta≤65℃
They are suitable for hazardous marine activity applications such as offshore drill platform oil tanks etc.
The lights are automatically water activated. when the water sensors of the light contact the water. The light will automatically activate and keep outputting the flashing white light which can uninterruptedly indicate the survivors` location to increase the success rate of rescue. They can be manually turned off and turned on while the water sensors contact with water. The lights can self-float on the water because of the structure design.